# Productive Robotics adds AI scanning to its seven-axis OB7 cobot for CNC machine tending

*Productive Robotics introduced OB7-AI at IMTS 2026, a cobot that scans a CNC machine to find fixtures and parts and reads the machine screen.*

Published: 2026-10-27 · Segment: In the Factory

![A white Productive Robotics OB7 collaborative robot arm with glowing blue joint lights reaches into the open door of a CNC lathe to tend the machine.](https://roboticsdaily.robotshop.com/_astro/productive-robotics-ob7-ai-imts-2026.B0xx5rG9_Z1AeoMV.jpeg)

Image: Productive Robotics / product page · press-kit

Productive Robotics of Santa Barbara, California, introduced OB7-AI, announced on 1 October 2026 after IMTS 2026 in Chicago. It is an AI-enabled version of the company's seven-axis OB7 collaborative robot, built for tending CNC machines in small and mid-sized job shops.

The robot scans the machine's work area to locate fixtures and parts, so blanks do not have to be placed at exact positions. It opens the machine door, loads the vise, presses start and reads the CNC screen to detect when a cycle has finished before unloading the part. The company says no AI training cycles are needed when the part or the task changes.

Price, shipping date, payload, reach and cycle times were not given, and all performance claims are the vendor's own. Machine tending is one of the most common first jobs for cobots in small shops, where setup time often decides whether a robot is worth buying.

## Sources

- [Productive Robotics (via RoboticsTomorrow)](https://www.roboticstomorrow.com/news/2026/10/02/productive-robotics-introduces-7-axis-cobot-with-physical-ai-/27196/) (primary source)

Read this capsule on Robotics Daily: https://roboticsdaily.robotshop.com/capsules/productive-robotics-ob7-ai-imts-2026/
